Achievement

List

2024

Paper

137)"Effect of polyacrylic acid-polypropylene-polyacrylic acid triblock copolymers with different acid content on mechanical properties of carbon fiber/polypropylene composites " Daichi Yokoi, Daisuke Sasaki, Tatsuhiro Takahashi, Polymer Composites .29267 1-12 2024

Paper

136)"Transparent X-ray shielding solutions with various metal ions " Ryoma Tokonami, Minoru Osanai, Masahiro Hosoda, Shinji Tokonami, Tatsuhiro Takahashi, ACS Omega 2024

Paper

135)"Flexible composites of barium sulfate modified by tannic acid using glycerol/starch for X-ray shielding applications" Ryoma Tokonami, Minoru Osanai, Masahiro Hosoda, Shinji Tokonami, Tatsuhiro Takahashi, Macromolecular Chemistry and Physics 2400273 1-7 2024

Paper

134)”Simple surface modification of barium sulfate for improving the interface of polymer composites and its x-ray shielding properties” Ryoma Tokonami, Minoru Osanai, Masahiro Hosoda, Shinji Tokonami, Tatsuhiro Takahashi Polymer Composite 2024 1-11

Paper

133)”High-Gas-Barrier Film for Organic Light-Emitting Diode Lighting” Tadahiro Furukawa, Kodai Taira, Hirokazu Chiba, Shun Sugimoto†2, Haruhiko Itoh, Tatsuhiro Takahashi ITE Transactions on Media Technology and Applications 2024 12(1) 133-142

2023

Paper

132) “Mechanical properties of carbon fiber/polypropylene composites using carboxylic-acid-modified polypropylene without and with oxazoline-containing polymer coated on carbon fiber” Daichi Yokoi, Masumi Takamura, Tatsuhiro Takahashi Composites Science and Technology, 242 (2023) 110213

Paper

131) “Novel Chain-end Modification of Polymer-Iodides via Reversible Complexation Mediated Polymerization with Functionalized Radical Generation Agents” Kazuya Ohtani, Kanta Shimizu, Tatsuhiro Takahashi, Masumi Takamura, Polymers, 2023, 15(12), 2667

Paper

130) “Coverage performance of PEDOT:PSS against particles on a substrate for OLEDs " Yu Kurosawa, Lina Sun, Tatsuhiro Takahashi, and Yoshiyuki Suzuri, Advanced Materials & Interfaces 2023,10(5),2201695

2022

Paper

129) “Solution-Processed Gas Barriers with Glass-like Ultrahigh Barrier" Tatsuki Sasaki, Lina Sun, Yu Kurosawa, Tatsuhiro Takahashi, and Yoshiyuki Suzuri, Advanced Materials & Interfaces 2022, 220151

Paper

128) “Surface Modification of Carbon Fiber for Enhancing the Mechanical Strength of Composites” Ryoma Tokonami, Katsuhito, Teruya Goto, and Tatsuhiro Takahashi, Polymers 2022 14(19) 3999

Paper

127) “Development of Electrically Conductive Thermosetting Resin Composites through Optimizing the Thermal Doping of Polyaniline and Radical Polymerization Temperature” Kohei Takahashi, Kazuki Nagura, Masumi Takamura, Teruya Goto, and Tatsuhiro Takahashi, Polymers 2022 14(18) 3876

Paper

126) “Electrically conductive carbon fiber reinforced plastics induced by uneven distribution of polyaniline composite micron-sized particles in thermosetting matrix” Kohei Takahashi, Katsuya Yaginuma, Teruya Goto, Tomohiro Yokozeki, Takao Okada, Tatsuhiro Takahashi, Composite Science and Technology 2022 228 109642

Paper

121) “Effect of the amount of the oxazoline compatibilizer on the mechanical properties of liquid crystalline polymer/polypropylene blends” S.Takasuka, T.Takahashi International Polymer Processing, 2022,37,38-44

2021

Paper

125) “Removal of Trithiocarbonyl End Group of RAFT-Polymerized Poly(Stearyl Acrylate) and Effect of the End Group on Thermal and Structural Properties” Eri Oishi, Masumi Takamura, Tatsuhiro Takahashi, Polymers 2021, 13, 4169

Paper

124) “Preparation of Oxazoline-Group-Functionalized Diamond Using Poly(2-vinyl-2-oxazoline) Based on a Model Reaction between Oxazoline and Carboxylic Acid”  Teruya Goto, Riku Nitta, Takuya Nukui, Mitsunobu Takemoto, Tatsuhiro Takahashi, Diamond and related materials, accepted for publication

Paper

123) “Characterization and mechanical strength of wholly aromatic liquid crystalline polymers with low melting point” S.Takasuka, K.Takahashi, T.Takahashi International Journal of Polymer Analysis and Characterization, 2021,27,43-51

Paper

122) "Nanometer-Thick SiN Films as Gas Barrier Coatings Densified by Vacuum UV Irradiation" T.Sasaki, L.Sun, Y.Kurosawa, T.Takahashi, Y.Suzuri, ACS Applied Nano Materials, 2021,4(10),10344-10353

Paper

120) “Reinforcing effect of compatibilizers containing oxazoline groups in liquid crystalline polymer/polypropylene blending material” S.Takasuka, T.Takahashi Journal of Polymer Materials, 2021,38,1-10

Paper

119) “Development of CFRP with Polyaniline-based resin using curable dopants employing storage stable prepregs” S.Pati, S.Manomaisantiphap, T.Goto, T.Takahashi, T.Yokozeki Applied Composite Materials 2021,28,381-394

2020

Paper

118)”Development of conductive CFRPs using PANI-P-2M thermoset polymer matrix” S.Pati, S.Das, T.Goto, T.Takahashi, T.Yokozeki Indian Journal of Engineering and Materials Sciences 27(6) 1067-1070 2020

Paper

117)”Comparison of semi-doped PANI/DBSA complex achieved by thermal doping and roll-mill process: A new perspective for application” Y.Zhou, K.Takahahi, S.V.R.Naidu, V.Kumar, T.Yokozeki, T.Goto, T.Takahashi 202 12 2020 August 122723 Polymer

2019

Paper

109) “Polyaniline-based all-polymeric adhesive layer: An effective lightning strike protection technology for high residual mechanical strength of CFRPs” V.Kumar, T.Yokozeki, T.Okada, Y.Hirano, T.Goto, T.Takahashi, AA.Hassen, T.Ogasawara Composite Sci. & Tech. 172 49-57 (2019) March

Paper

111) “Synthesis and Characterization of PANI/P-2M Conductive Composites: Thermal, Rheological, Mechanical and Electrical Properties” S.Pati, V.Kumar, T.Goto, T.Takahashi, T.Yokozeki 40(15) 1-8 2019 Polymer Composites

Paper

112) “Including a curable dopant with methacrylate functionality for polyaniline based composites” S.Pati, V.Kumar, T.Goto, T.Takahashi, T.Yokozeki 73 171-177 2019 Polymer Testing

Paper

113) “The effect of terminal functional groups on fluoropolymer on electrowetting device performance” E.Oishi, N.Araki, T.Goto, H.Awano, T.Takahashi 7(3), 52 2019 September Technologies

Paper

114) “Polyaniline-based all-polymeric adhesive layer: An effective lightning strike protection technology for high residual mechanical strength of CFRPs” V.Kumar, T.Yokozeki, Y.Hirano, T.Goto, T.Takahashi, A.A.Hassen, T.Ogasaawra 172, 49-57 2019 March Composite Science and Technology

Paper

115) “Interfacial engineering in solution processing of silicon-based hybrid multilayer for high performance thin film encapsulation” L.Sun, K.Uemura, T.Takahashi, T.Yoshida, Y.Suzuri 2019 Applied Materials & Interfaces, 11, 46, 43425–43432

Paper

116) “Thermal stability, mechanical properties, impact strength, and uniaxial extensional rheology of reactive blends of PS an SBS polymers” M.M.Hassan, T.Takahashi, K.Koyama 2019 Polymer Bulletin 76(11) 1-20 https://doi.org/10.1007/s00289-018-02674-y

2018

Paper

106) “Cationic scavenging by polyaniline: Boon or bane from synthesis point of view of its nanocomposites” V.Kumar, S.Manomaisantiphap, K.Takahashi, Teruya Goto, N.Tsushima, T.Takahashi, T.Yokozeki Polymer 149 169-177 (2018)

Paper

107) “Reducing the contact resistanc between a textile of MWCNT-coated conductive fibers and a metal wire using carbon black/dimethyl silicone oil” K.Akimoto, T.Goto, H.Awano, K.Yonetake, T.Takahashi Tanso 283 124-127 (2018) (in Japanese)

Paper

108) “Effect of through-thickness electrical conductivity of CFRPs on lightning strike damages” V.Kumar, T.Yokozeki, T.Okada, Y.Hirano, T.Goto, T.Takahashi, T.Ogasawara Composite Part A 114 429-438 (2018)

Paper

110) “Scavenging phenomenon and improved electrical and mechanical properties of polyniline-divinylbenzene composite in presence of MWCNT” V.Kumar, T.Yokozeki, T.Goto, T.Takahashi, S.Sharma, SR.Dhakate, BP. Singh INTERNATIONAL JOURNAL OF MECHANICS AND MATERIALS IN DESIGN 14, 679-708 (2018) December

2017

Paper

104) “Irreversible tunability of through-thickness electrical conductivity of polyaniline-based CFRP by de-doping” V.Kumar, T.Yokozeki, T.Goto, T.Takahashi, SR. Dhakate, BP.Singh, Composite Sci. & Tech. 152 20-26 (2017) November

Paper

105) “Spontaneous homeotropic alignment of nematic liquid crystals induced by a double-armed side chain liquid crystalline polymethacrylate” O.Haba, W.Matsuno, N.Nakamura, H.Awano, T.Takahashi, K.Yonetake, Y.Momoi Molecular Crystals and Liquid Crystals 1542-1406 (Print) 1563-5287 (Online) (2017)

2016

Paper

101) “Lighting damage suppression in a carbon fiber-reinforced polymer with a polyaniline-based conductive thermost matrix” Y.Hirano, T.Yokozeki, Y.Ishida, T.Goto, T.Takahashi, D.Qian, S.Ito, T.Ogasawara Composite Sci. & Tech. 127 1-7 (2016) April

Paper

102) “Synthesis and caracterization of PANI-DBSA/DVB composite using roll-milled PANI-DBSA complex” V.Kumar, T.Yokozeki, T.Goto, T.Takahashi Polymer 86 129-137 (2016) March

Paper

103) “Highly conductive graphene oxide/polyaniline hybrid polymer nanocomposite with simultaneously imporved mechanical properties“ XY.Cheng, V.Kumar, T.Yokozeki, T.Goto, T.Takahashi, J.Koyanagi, LX.Wu, R.Wang Composite Part A 82 100-107 (2016) March

2015

Paper

100) “Development and characteriztion of CFRP using polyaniline-based conductive thermoset matrix” T.Yokozeki, T.Goto, T.Takahashi, D.Qian, S.Itou, Y.Hirano, Y.Ishida, T.Ogasawara, M.Ishibashi Composite Sci. & Tech. 117 277-281 (2015)

2014

Paper

99) “Homeotropic orientation of nematic liquid crystals induced by dissolving polypropyleneimine dendrimer having peripheral mesogens” O.Haba, D.Hiratsuka, T.Shiraiwa, N.Funakoshi, H.Awano, T.Koda, T.Takahashi, K.Yonetake, M.Kwak, Y.Momoi, N.Kim, S.Hong, D.Kang, Y.Choi Optical Materials Express 4(5) 934-943 (2014)

2013

Paper

96) “Orientation and Polarized Optical Emission Properties of Platinum(II) Complexes in Smectic Liquid Crystals” T.Sato, H.Awano, K.Katagiri, YJ.Pu, T.Takahashi, K.Yonetake Euro. J. Inor. Chem., 12, 2212-2219 (2013)

Paper

97) “Preparation and characterisation of Si-O-C ceramis made from a preceramic polymer and rece bran” M.M.Hassan, T.Takahashi, K.Koyama, J. Euro. Cera. Soc. 33(6) 1207-1217 (2013)

Paper

98) “Thermal and Mechanical Properties of Novel Composites of Methyl Silicone Polymer and Partially Ceramized Rice Bran” M.M.Hassan, T.Takahashi, K.Koyama, Ind. Eng. Chem. Res. 52(3) 1257-1283 (2013)

2012

Paper

94) “Influence of Extrusion Temperature on Molecular Architecture and Crystallization Behavior of Peroxide-Induced Slightly Crosslinked Poly(L-lactide) by Reactive Extrusion” M.Takamura, M.Sugimoto, S.Kawaguchi, T.Takahashi, K.Koyama, J. Appl. Polym. Sci. 123(3), 1468-1478 (2012)

Paper

95) “Synthesis, characterization, and polarized luminescence properties of platinum(II) complexes having a rod-like ligand” T.Sato, H.Awano, O.Haba, H.Katagiri, T.Takahashi, K.Yonetake Dalton Transactions 41(27) 8379-8389 (2012)

2011

Paper

90) “Effect of processing temperature on thermal doping of polyaniline without shear” T.Goto, H.Awano, T.Takahashi, K.Yonetake, S.K. Sukumaran Polym. Adv. Tech. 22(8) 1286-1291 (2011)

Paper

91) “Crystal structure of ethene-/alpha-olefin copolymers with various long comonomers (C(8)-C(26))” F.J. Stadler, T.Takahashi, K.Yonetake Europ. Polym. J. 47 1048-1053 (2011)

Paper

92) “Luminescence characteristics for blends of Iridium complexes with liquid crystalline ligands” T.Sato, T.Kageyama, H.Awano, O.haba, T.Takahashi, K.Yonetake, J.Kido Kobunshi Ronbunshu 68(3) 115-121 (2011) (in Japanese)

Paper

93) “Flow behaviours of liquid crystals on vertical alignment layers of polyimides” H.Awano, Y.Kanno, T.Takahashi, K.Yonetake, S.Ishida, Y.Kawasumi, A.Hirai, Liquid Crystal, 38(9) 1137-1146 (2011)

2010

Paper

86) “Characterization of multi-walled carbon nanotubes which were processed by a dispersion method and its application to electro conductive thin layer.” T.Goto, H.Awano, T.Takahashi, K.Yonetake, N.Nishimura, M.Hida Kobunshi Ronbunshu 67(2) 89-96 (2010) (in Japanese)

Paper

88)”Evaluation of viscosity of CNT-dispersed polymer under various processing conditions” T.Yokozeki, C.Jitpitpatpong, A.Arai, M.Ishibashi, T.Yanagisawa, A.Kawasaki, T.Takahashi, T.Aoki Nihon Fukugouzairyou Gatkaishi 36(1) 19-24 (2010)

Paper

89) “Molecular characterization and crystallization behavior of peroxide-induced slightly crosslinked poly(L-lactide) during extrusion” M.Takamura, T.Nakamura, S.Kawaguchi, T.Takahashi, K.Koyama Polymer J 42(7) 600-608 (2010)

2009

Paper

83)”Lattice sizes, crystallinities, and spacing between amorphous chains -characterization of ethene-/-olefin copolymers with various comonomers and comonomer contents measured by wide angle X-ray scattering” F.Stadler, H.Muenstedt, K.Yonetake, T.Takahashi e-polyemr No40 1-19 (2009)

Paper

84)”Crystallite dimensions - characterization of ethene-/-olefin copolymers with various comonomers and comonomer contents measured by small- and wide angle X-ray scattering” F.Stadler, H.Muenstedt, K.Yonetake, T.Takahashi e-polyemr No41 1-19 (2009)

Paper

85)”Method to evaluate the length and curvature of carbon nanotubes” A.Arai, M.Ishibashi, T.Yanagisawa, T.Goto, T.Takahashi, K.Yonetake Kobunshi Ronbunshu 66(7) 243-249 (2009)

Paper

87)”Fracture toughness improvement of CFRP laminates by dispersion of cup-stacked carbon nanotubes” T.Yokozeki, Y.Iwahori, M.Ishibashi, T.Yanagisawa, K.Imai, M.Arai, T.Takahashi, K.Enomoto Comp. Sci. Tech.,69(14) 2268-2273 (2009)

2008

Paper

80)”Surface modification of MWCNT by by Friedel-Crafts Acylation” H.Arai, H.Awano, T.Takahashi, K.Yonetake, O.Haba Kobunshi Ronbunshu 65(2), 192-195 (2008) (Japanese)

Paper

81)” Effect of Type of Peroxide on Cross-linking of Poly(L-lactide)” M. Takamura, T. Nakamura, T. Takahashi, K.Koyama Polymer Degradation and Stability 93(10) 1909-1916 (2008)

Paper

82)”Preparation of MWCNT/Nylon6 composites by in situ polymerization and its evaluation” Y.Takahashi, H.Awano, O.Haba, T.Takahashi, K.Yonetake Kobunshi Ronbunshu 65(11) 679-687 (2008)

2007

Paper

66)” Microcellular ceramics by using silicone preceramic polymer and PMMA polymer sacrificial microbeads” M.Shibuya, T.Takahashi, K.Koyama Comp. Sci. Tech., 67 119-124 (2007)

Paper

72)”Dynamic melt rheological properties of ionomers based on poly(ethylene – co - acrylic acid) and poly(ethylene-co-methacrylic acid)” T.Kurian, M.Nishio, A.Nishioka, T.Takahashi, K.Koyama Int. J. Polym. Mat., 56, 135-145 (2007)

Paper

75)” Alignment of vapor-grown carbon fibers in polymer under magnetic field” T.Takahashi, K.Suzuki, H.Awano, K.Yonetake Chem. Phys. Lett. 436, 378-382 (2007)

Paper

76)”Influence of filler type and contents on foaming structures in ABS microcellular foams” A.Tsuchiya, H.Tateyama, T.Kikuchi, T.Takahashi, K.Koyama Polymer J. 39(6), 514-523 (2007)

Paper

77)”Preparatiopn and characteristics of a vapor-grown carbon fiber/ceramic composite using a methylsilicone precursor” M.Shibuya, M.Sakurai, T.Takahashi Comp. Sci. Tech., 67, 3338-3344 (2007)

Paper

78)”Alignment and micropatterning of carbon nanotubes in polymer composites using modulated magnetic field” G.Piao, F.Kimura, T.Takahashi, Y.Moritani, H.Awano, S.Nimori, K.Tsuda, K.Yonetake, T.Kimura Polymer J. 39(6), 589-592 (2007)

Paper

79)”Various oriented structural development of vapor-grown carbon fiber / polymer composite film by magnetic field and electric conductive properties” T.Ookubo, H.Awano, T.Takahashi, K.Yonetake, Y.Oishi Kobunshi Ronbunshu 64(11), 727-734 (2007) (Japanese)

2006

Paper

64)”Aligning vapor-grown carbon fibers in polydimethylsiloxane using dc electric or magnetic field” T.Takahashi, T.Murayama, A.Higuchi, H.Awano, K.Yonetake Carbon, 44, 1180-1188 (2006)

Paper

65)” Influence of fillers dispersed in ABS plastic resin on foaming structures in microcellular foams” A.Tsuchiya, T.Kikuchi, T.Takahashi, K.Koyama Seikeikakou 18, 427-433 (2006) (Japanese)

Paper

67) “Elongational viscosity of polymer composite including hydrophilic or hydrophobic silica nano-particles” M.Kakuda, T.Takahashi, K.Koyama Nihon Reoroji Gatkaishi 34(3) 181-184 (2006)

Paper

68) “Magnetic processing of polymer composite films including vapor-grown carbon fibers” T.Ookubo, T.Takahashi, H.Awano, K.Yonetake, Y.Oishi Tanso 223 169-175 (2006) (Japanease)

Paper

69)” Phenomenon of electric conductivity reduction by UV irradiation for UV-curable polymer composite film including a small amount of VGCF” E.Sato, M.Fujimoto, T.Takahashi, K.Yonetake, K.Koyama Tanso 223 167-182 (2006) (Japanease)

Paper

70)” Dispersion of vapor-grown carbon fibers in ionic liquid” J.Samuel, H.Awano, T.Takahashi, K.Yonetake, K.Koyama Tanso 223 188-190 (2006)

Paper

73)”Relationship between hot-tack property and entanglement behaviour for polystyrene having different molecular weight distribution” M.Kakuda, T.Takahashi, K.Miyata, M.Sugimoto, T.Taniguchi, K.Koyama J. Adhesion Soc. Jpn., 42(12), 506-512 (2006) (Japanease)

Paper

74) ”Effect of melt mixing on electric conductivity of vapor grown carbon fiber/polycarbonate composite (II)” T.Yasuda, T.Takahashi, K.Yonetake, K.Koyama, K.Takahashi Seikeikakou 18(11), 813-818 (2006) (Japanese)

2005

Paper

54)”Modeling strain-hardening of polydisperse polystyrene melts by molecular stress function theory” M.Wagner, S.Kheirandish, K.Koyama, A.Nishioka, A.Minegishi, T.Takahashi Rheol. Acta 44, 235-243 (2005)

Paper

55)” Percolation study of orientated short-fiber composites by a continuum model” T.Natsuki, M.Endo, T.Takahashi, Physica A 352, 498-508 (2005)

Paper

56)”A novel elongational rheology control of PS by SBS and dicumyl peroxide” A.Minegishi, A.Nishioka , T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama Nihon Reoroji Gatkaishi 33(3), 141-144 (2005)

Paper

57)”Magnetic processing of polymer composite films including carbon fibers” T.Ookubo, T.Takahashi, Y.Oh, H.Awano, K.Yonetake, Y.Oishi Tanso 217, 104-110 (2005) (Japanese)

Paper

58)” Effect of Packing Pressure on the Shrinkage Anisotropy of Injection Molded Parts of Acrylonitrile-butadiene-styrene (ABS) Resins” T.Kameda, T.Takahashi, K.Koyama Seikeikakou 17, 342-348(2005) (Japanese)

Paper

59)”Uniaxial elongational viscosity of PC/a small amount of PTFE blend” T.Kurose, T.Takahashi, M.Sugimoto, T.Taniguchi, K.Koyama Nihon Reoroji Gatkaishi 33, 173-182(2005)

Paper

60)” Solubility Parameters of Biodegradable Polymers from Turbidimetric Titrations” M.Imaizumi, T.Nagata, Y.Goto, Y.Okino,T.Takahashi, K.Koyama Kobunshi Ronbunshu 62, 438-440 (2005) (Japanese)

Paper

61)”Effect of melt mixing on electric conductivity of vapor grown carbon fiber/polycarbonate composite” T.Yasuda, T.Takahashi, K.Yonetake, K.Koyama Seikeikakou 17(7) 490-496 (2005) (Japanese)

Paper

62)”Effect of packing pressure on molding shrinkage distribution of injention molded parts of acrylonitril-styrene resin” T.Kameda, T.Takahashi, K.Koyama Seikeikakou 17(8), 571-579 (2005) (Japanese)

Paper

63)”Oriented crystallization of polycarbonate by vapor grown carbon fiber and its application” T.Takahashi, A.Higuchi, H.Awano, K.Yonetake, T.Kikuchi Polym. J., 37(12), 1-7 (2005)

Paper

71)”The influence of heat treatment on uniaxial elongational flow behavior of PS/SBS blends” A.Nishioka, AMinegishi, T.Takahashi, T.Koda, Y.Masubuchi, J.Takimoto, K.Koyama Nihon Reoroji Gatkaishi 34(4), 189-197 (2005)

2004

Paper

47)”Uniaxial elongational viscosity of ethylen ionomer / styrene-co-methacrylic acid blends” A.Nishioka, M.Nishio, M.Sugimoto, T.Takahashi, M.Koda, S.Ikeda, K.Koyama Nihon Reoroji Gatkaishi 32, 49-53 (2004) (Japanese)

Paper

49)”Comparison of the length of vapor-grown carbon fiber before and after mixing process” E.Sato, T.Takahashi, K.Koyama Koubunnshi Ronbunnshu, 61, 144-148 (2004)(Japanese)

Paper

50)” Mechanical properties of poly(L-lactic acid) film” J.Takagi, T.Nemoto, T.Takahashi, T.Taniguchi, K.Koyama Seni-Gattukai-Shi, 60(7), 230-234 (2004) (in Japanese)

Paper

51)”Thermally stimulated current measurement for a blend of poly(vinylidene fluoride-trifluoroethylene copolymer and poly(methyl methacrylate)” T.Hirayama, T.Takahashi, K.Koyama Koubunnshi Ronbunnshu, (Japanese) 61(5), 335-340 (2004)(in Japanese)

Paper

52)” A new process to make a porous PTFE structure from PTFE aqueous dispersion with the help of hydrogel” T.Kurose, T.Takahashi, K.Koyama J. Porous. Mat. 11, 173-181 (2004)

Paper

53)”Uniaxial, biaxial, and planar elongational viscosities for ionomers based on poly(ethylene-co-methacrylic acid)” A.Nishioka, M.Nishio, T.Takahashi, K.Koyama Nihon Reoroji Gatkaishi 32(2), 65-69 (2004) (Japanese)

2003

Paper

33)”Direct observation of polymer crystallization process under shear by a shear flow observation system” K.Watanabe, W.Nagatake, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama Polym. Testing 22(1), 101-108 (2003)

Paper

35) ”Analysis of the effect of incorporation of a small amount of PMMA on fiber structure formation of PET” M.Yoshimura, K.Iohara, H.Nagai, T.Takahashi, K.Koyama J. Macromol. Sci. – Phys.B42(1), 189-199 (2003)

Paper

36) ”Structure formation of blend and sheath/core conjugated fibers in high speed spinning of PET including a small amount of PMMA” M.Yoshimura, K.Iohara, H.Nagai, T.Takahashi, K.Koyama J. Macromol. Sci. – Phys. B42(2), 325-339 (2003)

Paper

38)”The effect of pre-thermal history on shear and uniaxial elongational viscosity of a tetrafluoroethylene / hexafluoropropylene copolymer near the crystal melting transition” T.Kurose, T.Takahashi, A.Nishioka, Y.Masubuchi, J.Takimoto, K.Koyama Rheol. Acta, 42, 338-344 (2003)

Paper

39)”Direct observation of crystallization of polybutene-1 under low shear rate flow” K.Watanabe, T.Takahashi, J.Takimoto, K.Koyama J. Macromol. Sci. – Phys., B42(5), 1111-1124 (2003)

Paper

40)”Temperature and pressure dependence of thermal conductivity measurement of polystyrene and polycarbonate” T.Kikuchi, T.Takahashi, K.Koyama J. Macromol. Sci. – Phys., B42 (5), 1097-1110 (2003)

Paper

41)”Temperature and pressure dependence of thermal conductivity measurements of high density polyethylene and low density polyethylene” T.Kikuchi, T.Takahashi, K.Koyama Kobunshi Ronbunshu, 60, 347-353 (2003) (in Japanese)

Paper

42)”Uniaxial elongational viscosity of FEP/ a small amount of PTFE blends T. Kurose, T. Takahashi, K. Koyama Nihon Reoroji Gakkaishi 31(4), 195-200 (2003)

Paper

43)”SiOC Ceramic Foams through Melt Foaming of a Methylsilicone Preceramic Polymer” T.Takahashi, P.Colombo J. Porous Materials 10, 113-121 (2003)

Paper

44) “Mechanical properties of poly(L-lactic acid)/biodegradable polyester blend films” J.Takagi, T.Nemoto, T.Takahashi, T.Taniguchi, K.Koyama Seikei-kakou, 15, 581-587 (2003) (in Japanese)

Paper

45)”Thermally stimulated current measurement for blends of styrene-acrylonitrile copolymer and poly(methyl methacrylate)” T.Hirayama, J.Watanabe, T.Takahashi, K.Koyama Seni-Gattukai-Shi, 59(10), 379-384 (2003)(in Japanese)

Paper

46)”Polycarbonate crystallization by vapor grown carbon fiber with and without magnetic filed” T.Takahashi, K.Yonetake, K.Koyama, T.Kikuchi Macromol. Rapid Comm., 24, 763-767 (2003)

Paper

48)”Development of dispersion and length-evaluation methods of vapor-grown carbon fiber” E.Sato, T.Takahashi, E.Natsume, K.Koyama Tanso, 209, 159-164 (2003) (Japanese)

2002

Paper

31)”Quantitative analysis of polymeric particles by using morphology filter” W.Wu, T.Takahashi, K.Koyama, T.Akatsuka Image Electronics Engineers Jpn., 31(2), 166-174 (2002) (in Japanese)

Paper

32)”Rheological characterization of ionic bonding in ethylene-ionomer melts with low neutralization degree” A.Nishioka, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama J. Rheol., 46(6), 1325-1339 (2002)

Paper

34)”Fiber structural formation about blends of PET and a small amount of PMMA under high speed spinning” M.Yoshimura, K.Iohara, H.Nagai, T.Takahashi, K.Koyama Seni-Gattkai-Shi, 58(8), 287-293 2002 (in Japanese)

Paper

37)”Composition dependence of viscosity of ethylene ionomer blends” M.Nishio, A.Nishioka, T.Takahashi, J.Takimoto, K.Koyama Nihon Reoroji Gatkaishi 30(3), 155-157 (2002)

2001

Paper

25) “Thermal evolution of a silicone resin / polyurethane blend from preceramic to ceramic foam” T.Takahashi, H.Muenstedt, P.Colombo, M.Modesti J. Mat. Sci., 36, 1627-1539 (2001)

Paper

26) “Melt Rheology and Structure of Silicone Reins” T.Takahashi, J.Kaschta, H.Muenstedt Rheol. Acta, 40, 490-498 (2001)

Paper

27) “Uniaxial Elongational Viscosity of PS / a small amount of UHMW-PS Blends” A.Minegishi, A.Nisnioka, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama Rheol. Acta, 40, 329-338 (2001)

Paper

28) “Oxidation resistant ceramic foam from a silicone preceramic polymer / polyurethane blend” T.Takahashi, H.Muenstedt, P.Colombo, M.Modesti J. Euro. Ceram. Soc., 21, 2821-2828 (2001)

Paper

29) “Uniaxial elongational flow behavior of SBS block copolymer melts treated at high temperature” A.Minegishi, T.Takahashi, A.Nishioka, Y.Masubuchi, J.Takimoto, K.Koyama Nihon Reoroji Gatkaishi 29, 61-62 (2001)

Paper

30) “Melt rheology of ethylene ionomers blended with a small-molecule acid” A.Nishioka, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama Polymer, 42, 7907-7910 (2001)

2000

Paper

23) “Development of shear flow thermal rheometer (SFTR) for direct measurement of crystallization fraction of polymer melts under shear deformation” W.Nagatake, T.Takahashi, Y.Masubuchi, J.Takimito, K.Koyama Polymer, 41, 523-531 (2000)

Paper

24) “Description of uniaxial, biaxial, and planar elongational viscosities of polystyrene melt by K-BKZ model” A.Nishioka, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama J. Non-Newt. Fluid Mech., 89, 287-301 (2000)

1999

Paper

18) “Elongational viscosity for miscible and immiscible polymer blends (1) – PMMA and AS with similar elongational viscosity” T.Takahashi, J.Takimoto, K.Koyama J. Appl. Polym. Sci., 73, 757-766 (1999)

Paper

19) “Elongational viscosity for miscible and immiscible polymer blends (2) – Blends with a small amount of UHMW polymer” T.Takahashi, J.Takimoto, K.Koyama J. Appl. Polym. Sci., 72, 961-969 (1999)

Paper

20) “Uniaxial elongational viscosity of various molten polymer composites” T.Takahashi, J.Takimoto, K.Koyama Polym. Comp. 20(3), 357-366 (1999)

Paper

21) “A systematic prediction of strain-hardening and softening properties of uniaxial elongational viscosity by the BKZ model” T.Takahashi, A.Nishioka, Y.Masubuchi, J.Takimoto, K.Koyama J. Macromol. Sci. – Phys., B38(3), 289-304 (1999)

Paper

22) “Adaptability of K-BKZ type constitutive equations for uniaxial, biaxial, and planar elongational viscosities of LDPE melt” A.Nishioka, T.Takahashi, Y.Masubuchi, J.Takimito, K.Koyama Seikei-kakou, 11(6), 517-526 (1999) (in Japanese)

1998

Paper

13) “Uniaxial elongational viscosity of poly(styrene-block-butadiene-block-styrene) melts” T.Takahashi, J.Takimoto, K.Koyama Mat. Sci. Res. Int., 4(2), 97-102 (1998)

Paper

14) “Elongational viscosities of random and block copolymer melts” T.Takahashi, J.Takimoto, K.Koyama J. Appl. Polym. Sci., 69, 1765-1774 (1998)

Paper

15) “Stress relaxation of polymer melts in biaxial and planar elongations” A.Nishioka, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama Mat. Sci. Res. Int., 4(2), 121-123 (1998)

Paper

16) “Measurement of biaxial elongational viscosity of polymer melts using lubricated squeezing flow method” A.Nishioka, Y.Takagi, T.Takahashi, Y.Masubuchi, J.Takimoto, K.Koyama Seikei-kakou 47(12), 1296-1300, (1998) (in Japanese)

Paper

17) “Strain-hardening property and internal deformation of polymer composite melts under uniaxial elongation” T.Takahashi, H.Nakajima, Y.Masubichi, J.Takimoto, K.Koyama Seni-Gattukai-Shi, 54(10), 538-543 (1998)

1997

Paper

10) “Microstructure study of acrylic polymer-silica nanocomposite surface by scanning force microscopy” M.Motomatsu, T.Takahashi, H.Nie, W.Mizutani, H.Tokumoto Polymer, 38, 177-182, (1997)

Paper

11) “The effect of ultrahigh molecular weight polymers on the nonlinear response in uniaxial elongational viscosity” A.Minegishi, Y.Naka, T.Takahashi, Y.Masubuchi, J.Takimito, K.Koyama Nihon Reoroji Gatkaishi 25, 215-216 (1997)

Paper

12) “Elongational viscosity of ABS polymer melts with soft or hard butadiene particles” T.Takahashi, W.Wu, H.Toda, J.Tokumoto, T.Akatsuka, K.Koyama J. Non-Newt. Fluid Mech., 68, 259-269 (1997)

1996

Paper

9) “Influence of glass beads on elongational viscosity of polyethylene with anomalous strain rate dependence of the strain-hardening” M.Kobayashi, T.Takahashi, J.Takimito, K.Koyama Polymer, 37, 3745-3747 (1996)

1995

Paper

5) “Effect of ionic interaction on linear and nonlinear viscoelastic properties on ethylene based ionomer melts” T.Takahashi, J.Watanabe, K.Minagawa, J.Takimito, K.Iwakura, K.Koyama Rheol. Acta, 34, 163-171 (1995)

Paper

6) “Nonlinear stress properties of poly(styrene-block-butadiene-block-styrene) melts under elongational and shear deformation” T.Takahashi, H.Toda, K.Minagawa, J.Takimito, K.Iwakura, K.Koyama J. Appl. Polym. Sci., 56, 411-417 (1995)

Paper

7) “Application of the time-temperature superposition principle to the shear and uniaxial elongational flow for polymer-inorganic particle composite melt” M.Kobayashi, T.Takahashi, K.Minagawa, J.Takimito, K.Koyama Kobunshi Ronbunshu, 52(8), 478-483 (1995) (in Japanese)

Paper

8) “Flow-induced whisker orientation and viscosity for molten composite systems in a uniaxial elongational flow field” M.Kobayashi, T.Takahashi, J.Takimoto, K.Koyama Polymer, 36, 3927-3933 (1995)

1994

Paper

3) “Anomalous temperature dependence in the elongational viscosity of ethylene-based graft copolymer melts” T.Takahashi, Y.Takagi, K.Minagawa, K.Iwakura, K.Koyama Polymer, 35, 4472-4473 (1994)

Paper

4) “Effect of ionic interaction on elongational viscosity of ethylene-based ionomer melts” T.Takahashi, J.Watanabe, K.Minagawa, K.Koyama Polymer, 35, 5722-5728 (1994)

1989

Paper

2) “Porphinato zinc complexes incorporated into the bilayer membrane of lipid liposomes” L.Wang, T.Takahashi, H.Ohno, E.Tsuchida J. Macromol, Sci. – Chem., A26(2&3), 481-493 (1989)

1988

Paper

1) “Oxygen exchange between polymerized liposome-embedded lipid-heme and human red blood cell” M.Yuasa, T.Takahashi, H.Nishide, E.Tsuchida J. Chem. Soc. Jpn., 4, 541-543 (1988) (in Japanese)